= Supported
X = Not supported
Printer model
Message Status code Return string
CS310, CS410,
CS510
CX310, CX410,
CX510
Intervention Required -
Fuser/Belt Life Warning
40038
Fuser/Belt Life
Warning [80]
XX
Intervention Required -
Fuser/Belt Exhausted
40038
Fuser/Belt
Exhausted [80]
XX
Intervention Required -
ITU Maintenance
40038
ITU Maintenance
[83]
XX
Intervention Required -
PJL OP Message
40048
[Pick up text from
'data1' and 'data2
but not
'userMessage1' and
'userMessage2']
XX
Intervention Required -
PJL ST Message
40049
[Pick up text from
'data1' and 'data2'
but not
'userMessage1' and
'userMessage2']
XX
Intervention Required -
Waste Toner Bottle Nearly
Full
40141
Waste toner bottle
nearly full [82.xx]
XX
Intervention Required -
Photoconductor Low
40204
[Color] imaging
unit low [84.xx]
XX
Intervention Required -
Photoconductor Low
40204
[Color]
photoconductor low
[84.xx]
XX
Intervention Required -
Transfer Module Life
Warning
40215
Transfer module
life warning
[83.xx]
XX
* This message applies only to two‑line printer models.
PJL messages for attendance conditions
= Supported
X = Not supported
Printer model
Message Status code Return string CS310, CS410, CS510 CX310, CX410, CX510
Intervention required -
Disk Corrupted.
Reformat?
32015
Disk corrupted
XX
Intervention Required -
Too Many Bins Attached
32030
Too many bins
attached [58]
XX
1
This message applies only to two‑line printer models.
2
This message contains a subset of letters CMYK, where CMYK denotes cyan, magenta, yellow, and black cartridges, respectively.
Appendix B: PJL support 49