preparing to set up the printer on
an Ethernet network 20
print driver
hardware options, adding 19
print irregularities 155
print job
canceling from the printer control
panel 48
canceling, from computer 48
print quality
replacing a developer unit 108
replacing imaging kit 98
replacing the waste toner
bottle 95
print quality troubleshooting
blank pages 159
characters have jagged edges 150
clipped pages or images 151
gray background on prints 152
horizontal voids appear on
prints 152
print irregularities 155
print is too dark 156
print is too light 157
printer is printing solid black
pages 159
repeating print defects 160
shadow images appear on
prints 161
skewed print 162
streaked horizontal lines appear
on prints 162
streaked vertical lines appear on
prints 163
toner fog or background shading
appears on prints 165
toner rubs off 165
toner specks appear on prints 166
transparency print quality is
poor 166
uneven print density 166
vertical voids appear on
prints 166
print troubleshooting
incorrect characters print 145
incorrect margins on prints 153
jammed pages are not
reprinted 144
job prints from wrong tray 146
job prints on wrong paper 146
jobs do not print 147
Large jobs do not collate 146
paper curl 154
paper frequently jams 144
print job takes longer than
expected 148
printing slows down 147
tray linking does not work 149
unexpected page breaks
occur 150
printer 19
configurations 9
minimum clearances 8
models 9
moving 8, 115
selecting a location 8
shipping 115
printer control panel
factory defaults, restoring 118
indicator light 11
Sleep button light 11
using 10
printer information
where to find 7
printer is printing blank pages 159
printer message
Jam, duplex area. Open front
door. [23y.xx] 125
printer messages
[Color] cartridge low [88.xy] 131
[Color] cartridge nearly low
[88.xy] 131
[Color] cartridge very low, [x]
estimated pages remain
[88.xy] 131
[Type] imaging kit low [84.xy] 138
[Type] imaging kit nearly low
[84.xy] 139
[Type] imaging kit very low, [x]
estimated pages remain
[84.xy] 139
Adjusting color 130
Bin full. Remove paper. 130
Cannot collate large document
[37] 130
Change [paper source] to [custom
string] 130
Change [paper source] to [custom
type name] 130
Change [paper source] to [paper
type] [paper size] 130
Close door 131
Complex page may misprint
[39] 131
Error reading USB drive. Remove
USB. 131
Incompatible tray [x] [59] 131
Insert tray [x] 131
Jam, front door [20y.xx] 124
Jam, fuser. Open front door.
[202.xx] 126
Jam, manual feeder [251.xx] 122
Jam, Multipurpose feeder
[250.xx] 122
Jam, standard bin [203.xx] 124
Jam, tray [x] [24y.xx] 128
Load [paper source] with [custom
string] 132
Load [paper source] with [custom
type name] 132
Load [paper source] with [paper
size] 132
Load [paper source] with [paper
type] [paper size] 132
Load Manual Feeder with [custom
string] 133
Load Manual Feeder with [custom
type name] 133
Load Manual Feeder with [paper
size] 133
Load Manual Feeder with [paper
type] [paper size] 133
Maintenance kit low [80.xy] 133
Maintenance kit nearly low
[80.xy] 134
Maintenance kit very low, [x]
estimated pages remain
[80.xy] 134
Memory full [38] 134
Memory low, no Resource Save
[35] 134
Network error, port [x] [54] 134
Network error, standard port
[54] 134
Non‑Lexmark [color] [supply type],
see User’s Guide [33.xy] 135
Paper too short [34] 135
Printer restart. Check last job. 135
Rear USB port disabled [56] 136
Reinstall missing or unresponsive
[color] cartridge [31.xy] 136
Reload printed pages in Tray
[x] 136
Remove packaging material, check
all 136
Index 190
To Next Page
Loading...
