Lexmark CS921 - Page 114

Action Yes No
Step 3
a Clean the printhead lens.
b Print the document.
Is the page or image still clipped?
Go to step 4. The problem is
solved.
Step 4
a Inspect the test pages to determine which color is aected.
b Remove, and then reinstall the photoconductor unit.
Warning—Potential Damage: Do not expose the
photoconductor unit to direct light for more than one minute.
Extended exposure to light may cause print quality problems.
Warning—Potential Damage: Do not touch the
photoconductor drum. Doing so may aect the quality of
future print jobs.
c Print the document.
Is the page or image still clipped?
Contact
customer
support.
The problem is
solved.
Toner easily rubs o
Leading edge
Trailing edge
ABC
DEF
Note: Before solving the problem, print the print quality test pages. From the home screen, touch Settings >
Troubleshooting > Print Quality Test Pages.
Action Yes No
Step 1
a Remove, and then reinstall the photoconductor unit.
Warning—Potential Damage: Do not expose the
photoconductor unit to direct light for more than one minute.
Extended exposure to light may cause print quality problems.
Warning—Potential Damage: Do not touch the
photoconductor drum. Doing so may
aect
the quality of
future print jobs.
b Print the document.
Does the toner easily rub o?
Go to step 2. The problem is
solved.
Troubleshooting 114