Static sensitivity notice
This symbol identifies static-sensitive parts. Do not touch the areas near these symbols without first touching
a metal surface in an area away from the symbol.
Temperature information
Ambient operating temperature 10 to 30°C (50 to 86°F)
Shipping temperature -10 to 40°C (14 to 104°F)
Storage temperature and relative humidity -10 to 40°C (14 to 104°F)
15 to 85% RH
Laser notice
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, Chapter I, Subchapter J for
Class I (1) laser products, and elsewhere is
certified
as a Class I laser product conforming to the requirements
of IEC 60825-1: 2014.
Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) AlGaAs
laser that is nominally 25 milliwatts operating in the wavelength region of 770–800 or 775–800 nanometers
and enclosed in a non-serviceable printhead assembly. The laser system and printer are designed so there is
never any human access to laser radiation above a Class I level during normal operation, user maintenance, or
prescribed service conditions.
Notices 163
To Next Page
Loading...
