6 Unpack the memory card.
Warning—Potential Damage: Avoid touching the connection points along the edge of the card.
7 Insert the memory card until it clicks into place.
8 Reattach the shield, and then reattach the access cover.
9 Reattach the connector cover.
10 Connect the power cord to the electrical outlet, and then turn on the printer.
CAUTION—POTENTIAL INJURY: To avoid the risk of
fire
or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
Upgrading and migrating 127
To Next Page
Loading...
