99
How to change a photoconductor kit
5 Install the toner cartridge into the new print cartridge assembly by aligning the white rollers on the toner cartridge
with the white arrows on the tracks of the photoconductor and pushing the toner cartridge in as far as it will go. The
cartridge clicks into place when correctly installed.
6 Install the print cartridge assembly into the printer by aligning the green arrows on the guides of the print cartridge
assembly with the green arrows on the tracks in the printer and pushing the print cartridge assembly in as far as it
will go.
7 Close the front cover.
Note: For information about resetting the imaging drum counter, see the instruction sheet that shipped with
the new kit.
To Next Page
Loading...
