4 Push the memory card into the connector until the latches snap into place.
5 Close the system board door.
Installing hardware options
Installing a 250- or 550-sheet drawer
The printer supports one optional drawer; you can install a 250- or 550-sheet drawer.
CAUTION—SHOCK HAZARD: If you are installing an optional drawer after setting up the printer, then turn the
printer off and unplug the power cord from the wall outlet before continuing
1 Unpack the drawer, and then remove any packing material from the outside of the drawer.
2 Remove the tray from the support unit.
1
Support unit
2
Tray
Additional printer setup
17
To Next Page
Loading...
Need help?
General
