Lexmark E 260dt B/W User Manual

Menu item Description
TCP/IP
Enable FTP/TFTP
Yes
No
Lets you view or change the setting
Note: Yes is the factory default setting.
TCP/IP
Enable HTTP Server
Yes
No
Lets you view or change the setting
Note: Yes is the factory default setting.
TCP/IP
WINS Server Address
DNS Server Address
Lets you view or change the setting
Note: This is a four-field IP address.
IPv6 menu
Use the following menu items to view or set the Internet Protocol version 6 (IPv6) information.
Note: This menu is available only for network models or printers attached to print servers.
Menu item Description
IPv6
Enable IPv6
On
Off
Enables IPv6 in the printer
Note: On is the factory default setting.
IPv6
Auto Configuration
On
Off
Enables the network adapter to accept the automatic IPv6 address
configuration entries provided by a router
Note: On is the factory default setting.
IPv6
View Hostname
View Address
View Router Address
Shows the setting
Note: These settings can be changed only from the Embedded Web
Server.
IPv6
Enable DHCPv6
Yes
No
Enables DHCPv6 in the printer
Note: Yes is the factory default setting.
AppleTalk menu
Menu item Description
Activate
Off
On
Activates or deactivates AppleTalk support
Note: On is the factory default setting.
Understanding printer menus
88

Lexmark E 260dt B/W Specifications

General

Brand	Lexmark
Model	E 260dt B/W
Category	Printer
Language	English