Lexmark E260d User Manual

To open the paper stop, pull it so it flips forward.
Notes:
• Do not leave the paper stop in the open position if you are
printing on transparencies. Doing so may cause creases in the
transparencies.
• When moving the printer to another location, make sure the
paper stop is closed.
Paper capacities
The capacities of the trays and the manual feeder are based on 75
g/m
2
(20 lb) paper.
Load up to Notes
Tray 1
250 sheets of paper
150 sheets of A6-size
paper
50 transparencies
Note: The A6 paper size is
supported only in Tray 1.
Load up to Notes
Tray 2
250 or 550 sheets of
paper
Note: Only one optional drawer
may be installed on the printer at
a time. The maximum amount of
paper that can be loaded depends
on whether you have an optional
250- or 550-sheet tray.
Manual feeder
1 sheet of paper
1 sheet of A6-size paper
1 transparency
1 sheet of card stock
1 envelope
Note: Feed paper into the manual
feeder only to the point where its
leading edge can contact the
paper guides. Do not force the
paper into the feeder.
Loading paper and specialty media
4

Lexmark E260d Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 35 ppm
Print Resolution	1200 x 1200 dpi
Processor Speed	400 MHz
Input Capacity	250-sheet input tray
Monthly Duty Cycle	Up to 50, 000 pages
Connectivity	USB 2.0
Paper Output Capacity	150 sheets
Functions	Print
Operating System Compatibility	Windows, Mac OS, Linux
Media Sizes Supported	A4, A5, A6, Letter, Legal, Executive
Maximum Paper Size	A4