EasyManuals Logo

Lexmark E260d User Manual

Lexmark E260d
9 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Paper jammed in the manual feeder can usually be grasped and
pulled straight out. If the jam cannot be removed this way, check
for jammed paper behind the photoconductor kit and toner
cartridge unit. For more information, see “Clearing jams behind
the photoconductor kit and toner cartridge” on page 7.
Clearing jams behind the rear
door
If the paper is exiting the printer, pull the paper out. If the paper
is not exiting the printer:
1
Push the release button, and then lower the front
door
.
2
Pull open the rear door.
The paper may be jammed with one end caught in the
standard exit bin.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
3
Remove the jammed paper.
4
Close both the front and rear doors.
5
Press to continue printing.
Clearing jams
9

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark E260d and is the answer not in the manual?

Lexmark E260d Specifications

General IconGeneral
Print TechnologyMonochrome Laser
Print SpeedUp to 35 ppm
Print Resolution1200 x 1200 dpi
Processor Speed400 MHz
Input Capacity250-sheet input tray
Monthly Duty CycleUp to 50, 000 pages
ConnectivityUSB 2.0
Paper Output Capacity150 sheets
FunctionsPrint
Operating System CompatibilityWindows, Mac OS, Linux
Media Sizes SupportedA4, A5, A6, Letter, Legal, Executive
Maximum Paper SizeA4

Related product manuals