Using the printer menus
66
Understanding the operator panel
Print Buffer
To print any data stored in the print buffer.
Note: Print Buffer is only available when you enter the Job Menu while Waiting is displayed. The
Waiting state occurs if an incomplete job is sent to the printer or an ASCII job, such as a print screen
command, is printing.
Reset Printer
To reset the printer to the user default value for each menu item, delete all downloaded resources
(fonts, macros, and symbol sets) stored in printer memory (RAM), and delete all data in the interface
link buffer.
Note: Before selecting Reset Printer, exit the software application you are using.
Menu item Purpose Values
To Next Page
Loading...
