Using the printer menus
71
Understanding the operator panel
PCL Emul Menu
Use the PCL Emul Menu to change printer settings that only affect jobs using the PCL emulation printer language.
Note: Values marked by an asterisk (*) are the factory default settings.
Menu item Purpose Values
A4 Width
To select the width of the logical page
for A4 size paper.
198 mm* Makes the logical page compatible
with the Hewlett-Packard LaserJet 5
Printer.
203 mm Makes the logical page wide enough to
print 80 10-pitch characters.
Auto CR after
LF
To specify whether the printer
automatically performs a carriage
return after a line feed control
command.
Off* Printer does not perform a carriage
return after a line feed control
command.
On Printer performs a carriage return after
a line feed control command.
Auto LF after
CR
To specify whether the printer
automatically performs a line feed after
a carriage return control command.
Off* Printer does not perform a line feed
after a carriage return control
command.
On Printer performs a line feed after a
carriage return control command.
Font Name
To choose a specific font from the
specified font source.
R0 Courier 10* The font name and font ID for all fonts
in the selected font source are
displayed. The font source
abbreviation is R for resident, F for
flash, K for disk, and D for download.
Font Source
To determine the set of fonts displayed
in the Font Name menu item.
Resident* Displays all fonts resident in printer
RAM when the printer ships from the
factory.
Download Displays all fonts downloaded to
printer RAM.
Flash Displays all fonts stored in flash
memory.
All Displays all fonts available to the
printer from all sources.
Lines per Page
To determine the number of lines that
print on each page.
1...255 The printer sets the amount of space
between each line (vertical line
spacing) based on the Lines per Page,
Paper Size, and Orientation menu
items. Select the correct Paper Size
and Orientation before changing Lines
per Page.
60*
(country/region-
specific factory
default values)
64*
(country/region-
specific factory
default values)
Orientation
To determine how text and graphics
are oriented on the page.
Portrait* Prints text and graphics parallel to the
short edge of the paper.
Landscape Prints text and graphics parallel to the
long edge of the paper.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
