Lexmark E352DN Menus And Messages Guide

27
Using printer menus
USB Menu
Use this menu selection to change printer settings affecting a Universal Serial Bus (USB) port.
Standard USB
Menu selection Purpose Values
PCL SmartSwitch Configures the printer so it automatically
switches to PCL emulation when a print
job received through the USB port
requires it, regardless of the default
printer language
On* Printer examines the data on the USB port
and selects PCL emulation if the data
indicates that is the required printer
language.
Off Printer does not examine the incoming
data. The printer uses PostScript emulation
to process the job if PS SmartSwitch is On,
or uses the default printer language
specified in the Setup Menu if PS
SmartSwitch is Off.
PS SmartSwitch Configures the printer so it automatically
switches to PostScript emulation when a
print job received through the USB port
requires it, regardless of the default
printer language
On* Printer examines data on the USB interface
and selects PostScript emulation if the data
indicates that is the required printer
language.
Off Printer does not examine the incoming
data. The printer uses PCL emulation to
process the job if PCL SmartSwitch is On,
or uses the default printer language
specified in the Setup Menu if PCL
SmartSwitch is Off.
NPA Mode Specifies whether the printer performs
the special processing required for
bidirectional communication, following
the conventions defined in the Network
Printing Alliance (NPA) Protocol
Note: Changing this menu item
automatically resets the printer.
Off The printer will not perform any NPA
processing.
On All data received by the printer must be in
NPA packets. Any non-packet data
received will be rejected as bad.
Auto* Printer examines the incoming data to
determine the format. If the incoming data
is not NPA packets, the information is
passed to the printer as non-NPA.
USB Buffer Configures the size of the USB input
buffer
Note: Changing the USB Buffer menu
item automatically resets the printer.
Disabled Job buffering is disabled. Any jobs already
buffered on the disk are printed before
normal processing of incoming jobs
resumes.
Auto* Printer automatically calculates the USB
Buffer size (recommended setting).
3K to maximum size
allowed
User specifies the USB Buffer size. The
maximum size depends on the amount of
memory in the printer, the size of the other
link buffers, and whether Resource Save is
set to On or Off. To maximize the range for
the USB Buffer size, disable or reduce the
size of the parallel and network buffers.

Lexmark E352DN Specifications

General

Color	No
Duplex printing	Yes
Print technology	Laser
Maximum resolution	2400 x 2400 DPI
Time to first page (black, normal)	6.5 s
Print speed (black, normal quality, A4/US Letter)	33 ppm
Internal memory	32 MB
Maximum internal memory	160 MB
Sound pressure level (printing)	52 dB
Total input capacity	250 sheets
Maximum input capacity	800 sheets
Envelopes sizes	7 3/4, 9, 10, B5, C5, DL
Maximum print size	210 x 297 mm
Media weight (tray 1)	80 gsm
Paper tray media types	Envelopes, Labels, Plain paper
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), Letter (media size), Statement (140 x 216mm), Legal (media size)
ISO A-series sizes (A0...A9)	A4, A5, A6
Maximum ISO A-series paper size	A4
Supported network protocols (IPv4)	TCP/IP IPv4, AppleTalk, TCP/IP IPv6
Compatible operating systems	Mac OS X Mac OS 9.x Citrix MetaFrame Linux Microsoft Windows 2000, NT, Me, XP, Server 2003, 98, Vista Novell UNIX
Maximum duty cycle	80000 pages per month
Sustainability certificates	ENERGY STAR
Operating altitude	0 - 2500 m
Operating temperature (T-T)	16 - 32 °C
Operating relative humidity (H-H)	8 - 80 %
Certification	FCC Class B, UL 60950-1, U.S. FDA, IEC 320-1, CSA, ICES Class B, CE Class B, CB IEC 60950-1, IEC 60825-1, GS (TÜV), SEMKO, UL AR, CS, TÜV Rh, N Mark, ACA C-tick Class B, CCC Class B, BSMI Class B, MIC, EK Mark, PSB

Weight and Dimensions

Dimensions (WxDxH)	396 x 359 x 259.5 mm