6
Using printer menus
4 Navigation buttons The Left Menu and Right Menu buttons are used to enter a menu group.
Once a menu group is active, press and release to go to the next selection,
or press and release to go to the previous selection.
You can also use these buttons to automatically increase ( ) or decrease ( )
the desired number of copies.
The printer must be in the Ready state to access the menu index. A message indicating the
menus are unavailable will appear if the printer is not ready.
Press and release the Select button to initiate action on a selection. Press
Select when the cursor appears next to the selection you want such as following
a link, submitting a configuration item, or when you want to start or cancel a job.
5 Back Press and release the Back button to return to the previous menu group. If at the top of
the menu group, the button functions as a Go button.
6 Go Press and release the Go button to place the printer in the Ready state when the
printer is offline.
Button or control panel
item
Function