Lexmark E460dw Service Manual

4-64
4513-630, -63W, -6EW
Toner level sensor removal
1. Open the front access door.
2. Remove the right side cover. See “Right side cover assembly removal” on page 3-62.
3. Disconnect the toner level sensor cable (A) from the controller board.
4. Squeeze the lower tabs (B) of the toner level sensor, and push it from its holder.
5. Remove the toner level sensor through the inside of the printer.
Note: The toner level sensor must be installed properly, or the printer will not function.
B A

Lexmark E460dw Specifications

General

Brand	Lexmark
Model	E460dw
Category	Printer
Language	English