4-36
4513-630, -63W, -6EW
Manual feed solenoid removal
1. Remove the right side cover. See “Left print cartridge guide removal” on page 3-24.
2. Remove the duplex. See “Duplex removal” on page 3-11.
3. Open the front access door, and place the printer on its right side.
Note: Be careful to not mar the finish of the printer.
4. Remove the two screws (A).
Note: The picture below shows the E260d, E260dn printer. The manual feed solenoid removal is the same for
all models.
To Next Page
Loading...
