Repair information 4-9
4513-630, -63W, -6EW
Door mount removal
1. Open the front cover.
2. Remove the lower front cover. See “Lower front cover removal” on page 3-27.
3. Remove the left side cover. See “Left side cover removal” on page 3-25
4. Remove the right side cover. See “Right side cover assembly removal” on page 3-62.
5. Disconnect the operator panel cable (A).
6. Remove the cable through the opening.
7. Remove the three screws (B) from the right side of the printer.
To Next Page
Loading...
