Lexmark Interpret S400 - Page 8

1
2
3
4
5
8
Cancel
Eco-Mode
7
6
Use the To
1 Address Book Access fax numbers from a saved list of numbers.
2 Redial/Pause In Fax mode:
• Insert a three-second pause in a fax number to wait for an outside line or
get through an automated answering system. Enter a pause only when you
have already begun entering the number.
• Display the last number dialed. Press the left or right arrow button to view
the last five numbers dialed.
3 Dialtone Dial the telephone number manually using the keypad before sending the fax.
4 Color/Black Switch to color mode or black-and-white mode.
5 Start button Start a print, scan, fax, or copy job, depending on which mode is selected.
6 2-Sided/Eco-Mode Activate 2-Sided to:
• Print on both sides of the paper (duplex).
Activate Eco-Mode to:
• Print on both sides of the paper (duplex).
• Change to Power Saver mode after the printer is left idle for ten minutes.
• Set screen brightness to low.
Note: 2-Sided/Eco-Mode is available only on select models.
Use the To
7 Cancel button
• Cancel a print, copy, scan, or fax job in progress.
• Exit from a menu level of the Copy, Scan, Fax, Photo, or File Print menu to
the top level of a menu.
• Exit from a menu level of the Setup menu to the top level of the previous
mode.
• Clear current settings or error messages, and return to default settings.
8 Keypad In Copy mode or Photo mode: enter the number of copies or prints you want
to make.
In Fax mode:
• Enter fax numbers.
• Navigate an automated answering system.
• Select letters when creating a Speed Dial list.
• Type numbers to enter or edit the date and time shown on the display.
8