Using the printer control panel
The following diagrams explain the sections of the printer control panel:
Use the: To
1
Power button
• Turn the printer on and off.
• Switch to Power Saver mode.
Note: When the printer is on, press
to switch to
Power Saver mode. Press and hold
for three seconds
to turn off the printer.
2
Copy button Access the copy menu and make copies.
3
Scan button Access the scan menu and scan documents.
4
Photo button Access the photo menu and print photos.
5 Back button
• Return to the previous screen.
• Exit from one menu level to a higher one.
6 Color/Black
Switch to color mode or black-and-white mode.
7
Start button Start a print, scan, or copy job, depending on which mode
is selected.
8 2-Sided/Eco-Mode
Activate 2-Sided to:
• Print on both sides of the paper (duplex).
Activate Eco-Mode to:
• Print on both sides of the paper (duplex).
• Change to Power Saver mode after the printer is left
idle for 10 minutes.
• Set screen brightness to low.
About your printer
9
To Next Page
Loading...
Need help?
General
