Lexmark M1145 - Page 9

7 Insert the imaging unit by aligning the arrows on the side rails
of the unit with the arrows on the side rails inside the printer,
and then insert the imaging unit into the printer.
8 Insert the toner cartridge by aligning the side rails of the
cartridge with the arrows on the side rails inside the printer,
and then insert the cartridge into the printer.
9 Close the front door.
10 From the printer control panel, touch to clear the
message and continue printing. For non‑touch‑screen printer
models, select Next > > Clear the jam, press OK >
.
[x]‑page jam, open rear door. [20y.xx]
1 Open the front door.
2 Gently pull down the rear door.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching
it.
3 Firmly grasp the jammed paper on each side, and then gently
pull it out.
Note: Make sure all paper fragments are removed.
4 Close the rear door.
5 From the printer control panel, touch to clear the
message and continue printing. For non‑touch‑screen printer
models, select Next > > Clear the jam, press OK >
.
[x]‑page jam, clear standard
bin. [20y.xx]
1 Firmly grasp the jammed paper on each side, and then gently
pull it out.
Note: Make sure all paper fragments are removed.
Clearing jams
9