Lexmark MB3442 User Manual

Action Yes No
Step 1
a Check if the printer is using a genuine and supported Lexmark
toner cartridge.
Note: If the cartridge is not supported, then install a
supported one.
b Print the document.
Is the print light?
Go to step 2. The problem is
solved.
Step 2
a Turn o the printer, wait for about 10 seconds, and then turn on
the printer.
b Increase toner darkness.
From the control panel, navigate to:
Settings > Print > Quality > Toner Darkness
c Print the document.
Is the print light?
Go to step 3. The problem is
solved.
Step 3
a Depending on your operating system, specify the paper type
from the Printing Preferences or Print dialog.
Notes:
• Make sure that the setting matches the paper loaded.
• You can also change the setting on the printer control
panel. Navigate to Settings > Paper > Tray Configuration
> Paper Size/Type.
b Print the document.
Is the print light?
Go to step 4. The problem is
solved.
Step 4
a Depending on your operating system, specify the print
resolution from the Printing Preferences or Print dialog.
b Set the resolution to 600 dpi.
c Print the document.
Is the print light?
Go to step 5. The problem is
solved.
Troubleshoot a problem 169

Lexmark MB3442 Specifications

General

Duplex Printing	Yes
Memory (Standard)	512 MB
Fax Speed	33.6 Kbps
Print Technology	Laser
Print Speed (Letter, Black)	42 ppm
Connectivity	Ethernet, USB, Wi-Fi
Paper Input Capacity (Standard)	250 sheets
Media Sizes Supported	A6, A5, Letter, A4, Executive, Envelopes
Type	Multifunction