3 Flex, fan, and align the paper edges before loading.
4 Load the paper stack with the printable side faceup, and then make sure that the side guides fit snugly
against the paper.
Notes:
• Load letterhead faceup with the header toward the front of the tray for one‑sided printing.
• Load letterhead facedown with the header toward the back of the tray for two‑sided printing.
• Do not slide paper into the tray.
• To avoid paper jams, make sure that the stack height is below the maximum paper fill indicator.
Loading paper and specialty media 32
To Next Page
Loading...
