Lexmark MC2535 User Manual

Faxing
Using the automatic document feeder and scanner glass
Automatic document feeder (ADF) Scanner glass
• Use the ADF for multiple‑page or two-sided
documents.
• Load an original document faceup. For multiple‑page
documents, make sure to align the leading edge
before loading.
• Make sure to adjust the ADF guides to match the width
of the paper that you are loading.
• Use the scanner glass for single‑page documents,
book pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media
(such as magazine clippings).
• Place the document facedown in the corner with the
arrow.
Setting up the printer to fax
Notes:
• The following connection methods are applicable only in some countries or regions.
• During the initial printer setup, clear the fax function check box and any other function you plan to set up
later, and then select Continue.
• If the fax function is enabled and not fully set up, then the indicator light may blink red.
Warning—Potential Damage: Do not touch cables or the printer in the area shown while actively sending or
receiving a fax.
Faxing 61

Lexmark MC2535 Specifications

General

Print Technology	Color Laser
Print Speed	Up to 35 ppm
Print Resolution	Up to 1200 x 1200 dpi
Duplex Printing	Yes
Monthly Duty Cycle	Up to 85, 000 pages
Display	4.3-inch color touch screen
Connectivity	USB, Ethernet, Wi-Fi
Output Trays Capacity	150 sheets
Copying Speed	Up to 35 cpm
Max Copying Resolution	Up to 600 x 600 dpi
Processor Speed	1.2 GHz
Scan Type	Flatbed with ADF
Memory	1024 MB
Paper Input Capacity	Standard: 250 sheets
Supported Media Sizes	A4, A5, A6, Executive, Legal, Letter
Scan Resolution	600 X 600 ppi (black)
Fax Resolution	300 x 300 dpi
Mobile Printing	Mopria
Operating System Compatibility	Windows, Mac, Linux
Media Type	Plain paper, Card stock, Paper labels, Envelopes
Paper Capacity	Up to 1450 sheets with optional trays