Lexmark MS317 User Manual

• Always use the handholds on the printer to lift it.
• Any cart used to move the printer must have a surface able to support the full footprint of the printer.
• Any cart used to move the hardware options must have a surface able to support the dimensions of the
options.
• Keep the printer in an upright position.
• Avoid severe jarring movements.
• Make sure that your
fingers
are not under the printer when you set it down.
• Make sure that there is adequate clearance around the printer.
Note: Damage to the printer caused by improper moving is not covered by the printer warranty.
Shipping the printer
When shipping the printer, use the original packaging or call the place of purchase for a relocation kit.
Maintaining the printer 141

Lexmark MS317 Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 35 ppm
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 50, 000 pages
Standard Connectivity	USB 2.0, Ethernet
Standard Memory	128 MB
Processor	800 MHz
Duplex Printing	Manual
Input Capacity	250 sheets
Output Capacity	Up to 150 sheets
First Page Out Time	6.5 seconds
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Linux, Mac