Using the Personal Identification Number (PIN) method
1 From the printer control panel, navigate to:
> Network/Ports > > Network [x] > > Network [x] Setup > > Wireless > > Wi‑Fi
Protected Setup >
> Start PIN Method >
2 Copy the eight‑digit WPS PIN.
3 Open a Web browser, and then type the IP address of your access point in the address
field.
Notes:
• The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the Web page correctly.
4 Access the WPS settings. For more information, see the documentation that came with your access point.
5 Enter the eight‑digit PIN, and then save the setting.
MS315 and MS415 Wi-Fi Protected Setup
Connecting the printer to a wireless network using Wi‑Fi Protected Setup
Before connecting the printer to a wireless network, make sure that:
• The access point (wireless router) is Wi‑Fi Protected Setup (WPS) certified or WPS‑compatible. For more
information, see the documentation that came with your access point.
• A wireless network adapter is installed on your printer and is working properly. For more information, see
the instruction sheet that came with the adapter.
Using the Push Button
Configuration
Method
1 From the control panel, navigate to:
> Settings > > Networks/Ports > > Network [x] > > Network [x] Setup > >
Wireless >
> Wireless Connection Setup > > Wi‑Fi Protected Setup > > Start Push
Button Method >
2 Follow the instructions on the printer display.
Using the Personal Identification Number (PIN) Method
1 From the control panel, navigate to:
> Settings > > Networks/Ports > > Network [x] > > Network [x] Setup > >
Wireless >
> Wireless Connection Setup > > Wi‑Fi Protected Setup > > Start PIN Method
>
2 Copy the eight‑digit WPS PIN.
3 Open a Web browser, and then type the IP address of your access point in the address field.
Additional printer setup 22
To Next Page
Loading...
