Lexmark MS415dn User Manual

Use To
Print Recovery
Jam Assist
On
O
Set the printer to automatically check for jammed paper.
Notes:
• On is the factory default setting. This sets the printer to
automatically dump blank pages or partially printed
pages to the standard bin after a jammed page has been
cleared.
• O requires the user to remove all pages from all
possible jam locations.
Print Recovery
Page Protect
O
On
Successfully print a page that may not have printed otherwise.
Notes:
• O is the factory default setting. This prints a partial
page when there is not enough memory to print the
whole page.
• On sets the printer to process the whole page so that
the entire page prints.
Press Sleep Button
Do nothing
Sleep
Hibernate
Determine how the printer, while in idle state, reacts to a short
press of the Sleep button.
Note: Sleep is the factory default setting.
Press and Hold Sleep Button
Do nothing
Sleep
Hibernate
Determine how the printer, while in idle state, reacts to a long
press of the Sleep button.
Note: Do nothing is the factory default setting.
Factory Defaults
Do Not Restore
Restore Now
Use the printer factory default settings except the
Network/Ports menu settings.
Notes:
• Do Not Restore is the factory default setting.
• Restore Now deletes all downloads stored in RAM.
Downloads stored in the flash memory are not aected.
Custom Home Message
O
IP Address
Hostname
Contact Name
Location
Zero Configuration Name
Custom Text 1
Select a custom home message that appears as an alternating
display of the printer status.
Note:
O
is the factory default setting.
Understanding the printer menus 105

Lexmark MS415dn Specifications

General

Brand	Lexmark
Model	MS415dn
Category	Printer
Language	English