Lexmark MS510 - Page 4

• Load letterhead facedown, with the top edge of the sheet toward the front of the tray. For two‑sided printing, load
letterhead faceup with the bottom edge of the sheet toward the front of the tray.
• Make sure the paper is below the maximum paper fill indicator located on the side of the width guide.
A
4
LT
R
E
X
E
C
B5
A
5
LT
R
LG
L
A
4
E
X
E
C
B
5
A
5
A
6
6 Insert the tray.
7 From the printer control panel, set the paper size and type in the Paper menu to match the paper loaded in the tray.
Note: Set the correct paper size and type to avoid paper jams and print quality problems.
Printing Guide
Page 4 of 5