Warning—Potential Damage: Controller board electronic components are easily damaged by static
electricity. Touch something metal on the printer before touching any controller board electronic components
or connectors.
An optional memory card can be purchased separately and attached to the controller board.
1 Access the controller board.
For the MS510dn, MS517dn, MS610dn, and MS617dn printer models, see
“Accessing the controller board”
on page 38.
For the MS610de printer model, see
“Accessing the controller board” on page 71.
2 Unpack the memory card.
Warning—Potential Damage: Do not touch the connection points along the edge of the card.
3 Align the notch (1) on the memory card with the ridge (2) on the connector.
1
2
Additional printer setup 15
To Next Page
Loading...
