Lexmark MS821dn User Manual

5 Install the staple finisher on the printer.
If configured with two or more optional hardware options, then the staple finisher must always be on top.
6 Connect the power cord to the printer, and then to the electrical outlet.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
7 Turn on the printer.
Add the staple
finisher
in the print driver to make it available for print jobs. For more information, see “Adding
available options in the print driver” on page 208.
Upgrading and migrating 204

Lexmark MS821dn Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Processor Speed	1 GHz
Standard Memory	512 MB
Standard Paper Input	650 sheets
Output Capacity	550 sheets
Monthly Duty Cycle	Up to 275, 000 pages
Connectivity	USB, Ethernet
Network Ready	Yes
USB Port	Yes
Operating System Compatibility	Windows, Mac, Linux
Maximum Paper Input	4400 sheets
Print Speed	Up to 55 pages per minute
Ethernet	Gigabit Ethernet