Lexmark MS821dn User Manual

Securing the printer
Note: The hard disk is supported only in some printer models.
Locating the security slot
The printer is equipped with a security lock feature. Attach a security lock compatible with most laptop
computers in the location shown to secure the printer in place.
Erasing printer memory
To erase volatile memory or buered data in your printer, turn o the printer.
To e ra se non ‑volatile memory or individual settings, device and network settings, security settings, and
embedded solutions, do the following:
1 From the control panel, navigate to:
Settings > Device > Maintenance > Out of Service Erase > Sanitize all information on nonvolatile memory
For non-touch-screen printer models, press
to navigate through the settings.
2 Depending on your printer model, select ERASE or Continue.
3 Follow the instructions on the display.
Erasing printer hard disk memory
1 From the control panel, navigate to:
Settings > Device > Maintenance > Out of Service Erase > Sanitize all information on hard disk
For non-touch-screen printer models, press
to navigate through the settings.
2 Depending on your printer model, select ERASE or Continue.
3 Follow the instructions on the display.
Securing the printer 95

Lexmark MS821dn Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Processor Speed	1 GHz
Standard Memory	512 MB
Standard Paper Input	650 sheets
Output Capacity	550 sheets
Monthly Duty Cycle	Up to 275, 000 pages
Connectivity	USB, Ethernet
Network Ready	Yes
USB Port	Yes
Operating System Compatibility	Windows, Mac, Linux
Maximum Paper Input	4400 sheets
Print Speed	Up to 55 pages per minute
Ethernet	Gigabit Ethernet