Lexmark MS821dn User Manual

Gesture Function
Swipe down then left
• Cancel a job.
• Go back to the previous setting.
• Exit the screen that appears without changing any setting or value.
Swipe up then down Repeat a spoken prompt.
Enabling Magnification mode
1 From the control panel, press and hold the 5 key until you hear a voice message.
2 Select
Magnification
mode.
3 Select OK.
For more information on navigating a
magnified
screen, see
“Navigating the screen using gestures” on page
25.
Adjusting the Voice Guidance speech rate
1 From the home screen, select Settings > Device > Accessibility > Speech Rate.
2 Select the speech rate.
Using the keyboard on the display
Do one or more of the following:
• Drag a finger over the key to announce the character.
• Lift the
finger
to enter or type the character in the
field.
• Select Backspace to delete characters.
• To hear the content in the input
field,
select Tab, and then select Shift + Tab.
Enabling spoken passwords or personal identification
numbers
1 From the home screen, select Settings > Device > Accessibility > Speak Passwords/PINs.
2 Enable the setting.
Setting up and using the accessibility features 26

Lexmark MS821dn Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Processor Speed	1 GHz
Standard Memory	512 MB
Standard Paper Input	650 sheets
Output Capacity	550 sheets
Monthly Duty Cycle	Up to 275, 000 pages
Connectivity	USB, Ethernet
Network Ready	Yes
USB Port	Yes
Operating System Compatibility	Windows, Mac, Linux
Maximum Paper Input	4400 sheets
Print Speed	Up to 55 pages per minute
Ethernet	Gigabit Ethernet