Lexmark MS821dn User Manual

Menu item Description
SNMP Version 3
Enabled
O
On*
Set Read/Write Credentials
User Name
Password
Set Read‑only Credentials
User Name
Password
Authentication Hash
MD5
SHA1*
Minimum Authentication Level
No Authentication, No Privacy
Authentication, No Privacy
Authentication, Privacy*
Privacy Algorithm
DES
AES‑128*
Configure SNMP version 3 to install and update the printer security.
Note: An asterisk (*) next to a value indicates the factory default setting.
IPSec
Note: This menu appears only in network printers or printers that are attached to print servers.
Menu item Description
Enable IPSec
O*
On
Enable Internet Protocol Security (IPSec).
Base Configuration
Default*
Compatibility
Secure
Set the IPSec base configuration.
Note: This menu item appears only when Enable IPSec is set to
On.
IPSec Device Certificate Specify an IPSec certificate.
Note: This menu item appears only when Base
Configuration
is set
to Compatibility.
Note: An asterisk (*) next to a value indicates the factory default setting.
Understanding the printer menus 81

Lexmark MS821dn Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Processor Speed	1 GHz
Standard Memory	512 MB
Standard Paper Input	650 sheets
Output Capacity	550 sheets
Monthly Duty Cycle	Up to 275, 000 pages
Connectivity	USB, Ethernet
Network Ready	Yes
USB Port	Yes
Operating System Compatibility	Windows, Mac, Linux
Maximum Paper Input	4400 sheets
Print Speed	Up to 55 pages per minute
Ethernet	Gigabit Ethernet