2 Squeeze and slide the paper guides to the correct position for the
size of the paper you are loading.
Note: Use the indicators on the bottom of the tray to position
the guides.
3 Flex the sheets back and forth to loosen them, and then fan them.
Do not fold or crease the paper. Straighten the edges on a level
surface.
4 Load the paper stack with the printable side faceup.
Notes:
• Load printable side facedown for duplex printing.
• Load pre-punched paper with the holes toward the front or
the left side of the tray.
• Load letterhead with the header on the left side of the tray.
• Make sure that the paper is below the maximum fill line on
the edge of the paper tray. Overfilling may cause paper jams.
5 Insert the tray.
6 From the control panel, set the paper size and paper type in the
Paper menu to match the paper loaded in the tray.
Loading the multipurpose feeder
1 Open the multipurpose feeder.
2
To Next Page
Loading...
