[x]‑page jam, press latch to access area G
and clear jammed staples. Leave paper in
bin. [402.93]
1 Remove all paper from the staple finisher bin.
2 Press the latch on the staple finisher, and then slide the finisher to
the left.
3 Remove the staple cartridge holder.
4 Use the metal tab to lift the staple guard, and then remove any
loose staples.
5 Press the staple guard down until it clicks into place.
6 Press the staples against the metal bracket.
Note: If the staples are at the rear of the cartridge, then shake
the cartridge downward to bring the staples near the metal
bracket.
14
To Next Page
Loading...
