Imaging unit nearly low
[84.xy] 271
Imaging unit very low, [x]
estimated pages remain
[84.xy] 271
Incompatible tray [x] [59] 272
Incorrect paper size, open
[paper source] [34] 272
Insert Tray [x] 272
Install Tray [x] 272
Insucient memory to collate
job [37] 272
Insucient memory to support
Resource Save feature
[35] 273
Insucient memory, some Held
Jobs were deleted [37] 273
Insucient memory, some held
jobs will not be restored
[37] 273
Load [paper source] with
[custom string] [paper
orientation] 273
Load [paper source] with
[custom type name [paper
orientation] 273
Load [paper source] with [paper
size] [paper orientation] 273
Load [paper source] with [paper
type] [paper size] [paper
orientation] 273
Load multipurpose feeder with
[custom string] [paper
orientation] 274
Load multipurpose feeder with
[custom type name] [paper
orientation] 274
Load multipurpose feeder with
[paper size] [paper
orientation] 274
Load multipurpose feeder with
[paper type] [paper size] [paper
orientation] 274
Maintenance kit low [80.xy] 274
Maintenance kit nearly low
[80.xy] 275
Maintenance kit very low, [x]
estimated pages remain
[80.xy] 275
Memory full [38] 275
Memory full, cannot print
faxes 275
Misfeed cleared, extra sheets in
output bin [24y.xx] 275
Network [x] software error
[54] 275
No analog phone line
connected to modem, fax is
disabled. 275
Non‑Lexmark [supply type], see
User’s Guide [33.xy] 275
Not enough free space in flash
memory for resources
[52] 276
Paper changes needed 276
Parallel port [x] disabled
[56] 276
Printer had to restart. Last job
may be incomplete. 276
Reinstall missing or
unresponsive cartridge
[31.xy] 277
Remove defective disk [61] 277
Remove packaging material,
[area name] 277
Remove paper from standard
output bin 277
Replace all originals if restarting
job. 277
Replace cartridge, 0 estimated
pages remain [88.xy] 277
Replace cartridge, printer region
mismatch [42.xy] 277
Replace defective imaging unit
[31.xy] 278
Replace imaging unit, 0
estimated pages remain
[84.xy] 278
Replace jammed originals if
restarting job. 278
Replace last scanned page and
jammed originals if restarting
job. 279
replace maintenance kit to
resume printing [80.xy] 279
replace maintenance kit,
recommended life exceeded
[80.xy] 279
Replace missing cartridge
[31.xy] 279
replace missing fuser
[80.xx] 279
Replace missing imaging unit
[31.xy] 279
Replace roller kit [81.xx] 279
Replace separator pad 280
Replace unsupported cartridge
[32.xy] 280
Replace unsupported imaging
unit [32.xy] 280
Replace wiper 281
Restore held jobs? 281
Scan document too long 281
Scanner automatic feeder cover
open 281
Scanner disabled by admin
[840.01] 281
Scanner disabled. Contact
system administrator if
problem persists. [840.02] 281
Scanner jam access cover
open 281
Scanner jam, open and close
automatic feeder top cover
[2yy.xx] 281
Scanner jam, remove all
originals from the scanner
[2yy.xx] 282
Scanner jam, remove jammed
originals from the scanner
[2yy.xx] 282
Scanner maintenance required
soon, use ADF Kit [80] 282
Scanner maintenance required,
use ADF Kit [80] 282
Serial port [x] disabled [56] 282
SMTP server not set up. Contact
system administrator. 282
Some held jobs were not
restored 282
Standard network software
error [54] 282
Standard USB port disabled
[56] 283
Supply needed to complete
job 283
The device is operating in safe
mode. Some print options may
be disabled or provide
unexpected results. 283
Too many disks installed
[58] 283
Too many flash options installed
[58] 283
Too many trays attached
[58] 283
Index 356
To Next Page
Loading...
