Lexmark MX931 - Page 212

Menu item Description
Punch
O*
2 holes
3 holes
4 holes
Specify the hole punch function for incoming faxes.
Note: This menu item appears only when a staple, hole punch
finisher
is
installed.
Staple
O*
1 staple
2 staples
4 staples
Specify the staple function for incoming faxes.
Note: This menu item appears only when a finisher is installed.
Holding Faxes
Held Fax Mode
O*
Always On
Manual
Scheduled
Hold received faxes from printing until they are released.
Holding Faxes
Fax Holding Schedule
Assign a schedule for holding faxes.
Note: This setting appears only if Held Fax Mode is set to Scheduled.
Note: An asterisk (*) next to a value indicates the factory default setting.
Admin Controls
Menu item Description
Enable Fax Receive
On*
O
Set the printer to receive fax.
Enable Color Fax Receive
On*
O
Set the printer to receive fax in color.
Enable Caller ID
On
O*
Show the phone number of the incoming call in the control panel.
Block No Name Fax
On
O*
Block incoming faxes sent from devices with no station ID or fax ID specified.
Banned Fax List
Add Banned Fax
Specify the phone numbers that you want to block.
Note: An asterisk (*) next to a value indicates the factory default setting.
Use printer menus 212