Lexmark T640 - Loading Media

Printing guide
Page 6 of 8
d From the word processor, spreadsheet,
browser, or other application, select
File
Æ Print.
e With General selected on the top pop-up
menu, go to the Paper Source pop-up menus
and select the tray containing the specialty
media, or the name of the media.
f Click Print.
Mac OS X
a From a word processor, spreadsheet,
browser, or other application, select File
Æ
Page Setup.
b Select the printer from the Format for pop-up
menu.
c Select the size of the specialty media from
the Paper pop-up menu.
d Click OK.
e From the word processor, spreadsheet,
browser, or other application, select
File
Æ Print.
f On the Copies & Pages pop-up menu, select
Imaging.
g Select the specialty media on the
Paper Type pop-up menu.
h On the Imaging pop-up menu, select Paper
Feed.
i Select the tray containing the specialty media
from the All pages from or First page from
/ Remaining from pop-up menus.
j Click Print.
Loading media
Get the most from the printer by properly loading the
trays, and setting the types and sizes for media.
General guidelines
• Do not overload the media sources.
• Make sure the stack height does not exceed the
maximum height indicated by the labels on the
guides. Overloading may cause jams.
• Never mix media types within a tray.
Loading 250-sheet, 500-sheet trays, or the
universally adjustable tray
Do not remove trays while a job prints or while Busy
blinks on the operator panel. Doing so may cause a
jam.
1 Remove the tray from the printer, and place it on
a flat, level surface.
2 Squeeze the side guide tab, and slide the guide
to the outside of the tray.