Printing guide
Page 8 of 8
Setting the Paper Type and Paper Size
After setting the Paper Type and Paper Size to the
correct values for the type and size used in the trays,
then any trays containing the same size and type are
automatically linked by the printer.
Note: If the size of the media you are loading is
the same size of the media previously
loaded, do not change the Paper Size
setting.
To change the Paper Size and Paper Type setting:
1 Make sure your printer is on.
2 Press on the operator panel.
3 Press until the appears next to Paper
Menu.
4 Press .
5 Press until the appears next to
Paper Size/Type.
6 Press .
7 Press until the appears next to the input
source you want to use.
8 Press .
9 Press until the appears next to the paper
size you want to use.
10 Press .
11 Press until the appears next to the paper
type you want to use.
12 Press .
This saves this setting as the new user default
size or type setting.
The message Submitting Selection
appears. The printer returns to the Ready state.
For more information, see:
• The Media Guide available in the Help Menu.
• The User’s Guide on the publications CD.
To Next Page
Loading...
