3 Click Install.
4 Click Agree.
5 Click Suggested.
6 Click Wireless Network Attach.
7 Remove the yellow label covering the USB port on the back of the printer.
8 Temporarily connect a USB cable between the computer on the wireless network and the printer.
Notes:
• After the printer is configured, the software will instruct you to disconnect the temporary USB cable so you
can print wirelessly.
• If your printer has faxing capabilities, then connect the telephone cable.
9 Follow the on-screen instructions to complete the software installation.
Note: Basic is the recommended path to choose. Choose Advanced only if you want to customize your
installation.
10 To allow other computers on the wireless network to use the wireless printer, follow steps 2 through 6 and step
9 for each computer.
Connecting to a wireless network using Windows
14
To Next Page
Loading...
