Connecting to a wireless network using
Macintosh
Installing the printer on a wireless network
(Macintosh)
Before you install the printer on a wireless network, make sure that:
• Your wireless network is set up and working properly.
• The computer you are using is connected to the same wireless network where you want to set up the printer.
Prepare to configure the printer
1 Locate the printer MAC address on the sheet that came with the printer. Write the last six digits of the MAC address
in the space provided below:
MAC address: ___ ___ ___ ___ ___ ___
2 If your printer has faxing capabilities, then connect the telephone cable.
3 Connect the power cable to the printer, and then to a properly grounded electrical outlet, and then turn the
printer on.
Enter the printer information
1 Access the AirPort options.
In Mac OS X version 10.5
a From the Apple menu, choose System Preferences.
b Click Network.
c Click AirPort.
In Mac OS X version 10.4 and earlier
a From the Go menu, choose Applications.
b Double-click Internet Connect.
Connecting to a wireless network using Macintosh
15
To Next Page
Loading...
