Setting up an alerts message
15
6
Setting up an alerts message
Note: SMTP must be configured to use this function. For more information, see Configuring SMTP on
page 17.
To set up alerts messages for this printer:
1 Access the Embedded Web Server.
2 From the Network Setup menu, click the link labeled Alerts Message.
The checkboxes located below these fields correspond to the types of alert that this address is going to receive. Select all
of the alerts that you want to be sent for each user by selecting the box next to the description. All boxes that are checked
Field Description
Display Name The name that is displayed as the sender of the alert message
Email Address The e-mail address that the alert message is sent to
Please Enter Administrator
Password
Enter the printer administrator password if one is set. By default there is no password, and
you can leave this field blank.
To Next Page
Loading...
