Configuring SMTP
17
7
Configuring SMTP
To configure SMTP settings, select SMTP from the Network Setup menu on the left side of the Web page, and then fill in
the information as described. This must be set up in order for scan to e-mail or alerts messages to function. Most of this
information can be found on your e-mail service provider's Web site.
Field Description
Primary SMTP Server Enter the address of your SMTP server. This information can be found by contacting your
e-mail provider or looking on their Web site.
Port Number The port that your SMTP server uses. Unless it is specified otherwise by your e-mail
provider, leave this number set to 25.
Authentication Method Some SMTP servers require authentication. If your e-mail provider requires
authentication, select the appropriate method from the drop-down list.
User Name The user name for SMTP Authentication. If authentication is not required, this field is left
blank.
Password The password for SMTP Authentication. If authentication is not required, this field is left
blank.
To Next Page
Loading...
