Configuring SMTP
18
Configuring SMTP
System Admin E-mail Enter the e-mail address of the system administrator. Any e-mail notifications sent by the
printer (alert message or scan to e-mail notification) will use the address entered in this
field as the sender of the message. If you enter johndoe@youremailprovider.com in this
field, the notification will appear as though johndoe@youremailprovider.com sent the
message himself. If this field is left blank, the recipient of the notification will have his
address listed as the sender, and the message will appear to be an e-mail that the
recipient sent to themselves. If an e-mail address is entered here, it must be a valid e-mail
address for this function to work properly.
Timeout [seconds] The number of seconds the system waits for timeout.
Please Enter Administrator
Password
Enter the printer administrator password if one is set. By default there is no password, and
you can leave this field blank.
Field Description
To Previous Page
Loading...
