Scanning to e-mail
6
2
Scanning to e-mail
Note: SMTP must be configured to use this function. For more information, see Configuring SMTP on
page 17.
Once Email is selected from the Add New Type drop-down menu, you will see the following information that needs to be
completed:
Field Description
One Touch Button Select a number 1–20 from the list. Once selected, this number corresponds to the button
on the printer that you press when you want to access this recipient.
Full Name (Required) The name that appears on the printer display when this recipient is chosen
E-mail Address (Required) This is where you enter the e-mail address of the recipient.
To Next Page
Loading...
