Lexmark C792/X792 Color Product Study Guide Rev 2.1
For Training Purposes Only 6/24/2011
60
- Check the mounting screws on the Reference Edge to make sure they are secure. DO NOT
turn the skew adjustment screw! (The picture below is shown with the Staging Deflector
Removed).
• Printhead – Check the 6 Printhead mounting screws to make sure they are secure. Loose
screws may allow the Printhead to move during the print process and cause skew. (The picture
below is shown looking down from above without the scanner and/or top cover.)
To Next Page
Loading...
