27
Notices
Federall
Communications
Commission (FCC)
compliance informatione information
statement
This device has been tested and found to comply with the limits for a y with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Note: To assure compliance
with FCC regulations on FCC regulations on
electromagnetic interference for
a Class A computing device, use
a properly shielded and
grounded cable such as
Lexmark part number 1329605. 1329605.
Use of a substitute cable not
properly shielded and grounded
may result in a violation of FCC
regulations.
The FCC Class A limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in Operation of this equipment in
a residential area is likely to cause harmful interference, in which case
the user will be required to correct the interference at his own
expense.
The manufacturer is not responsible for any radio or television
interference caused by using other than recommended cables or by
unauthorized changes or modifications to this equipment.
Unauthorized changes or modifications could void the user's authority
to operate this equipment.
Industry Canada
compliance statementpliance statement
This Class A digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.Regulations.
Avis de conformité auxé aux
normes d’Industrie
Canada
Cet appareil numérique de la classe A respecte toutes les exigences
du Règlement sur le matériel brouilleur du Canada.
European Community
(EC) directivesdirectives
conformity
This product is in conformity with the protection requirements of EC y with the protection requirements of EC
Council directives 89/336/EEC and 73/23/EEC on the approximation 73/23/EEC on the approximation
and harmonization of the laws of the Member States relating to g to
electromagnetic compatibility and safety of electrical equipment
designed for use within certain voltage limits.
To Next Page
Loading...
