Lexmark X83 - Using the Scan & Copy Control Program

Basics
Copying
Printing
Scanning
Troubleshooting
Appendix
8
Basics
Index
www.lexmark.com
Lexmark X83
Using the Scan & Copy Control Program
When the software is installed on your computer, you can use the Scan & Copy Control
Program to customize scan, print, and copy jobs. To open the Scan & Copy Control Program:
1 Click Start Programs Lexmark X83 Scan & Copy Control Program.
Select: To:
The keypad Set the number of copies to print, from 1 to 99.
Reduce/Enlarge Scroll and select the size of your output.
Fit to page Scroll and select the size of your output.
Auto Crop Crop the image during scanning.
Rotate Rotate the image 90 degrees clockwise during scanning.
The brightness bar Adjust how dark or light you want the copy to be.
Color Make a color scan or copy of a color original.
Gray Make a black and white scan or copy of a color original.
B/W Make a black and white scan or copy of a black and white original
document.
Text/(OCR) Scan a document into an application to let you edit the text.