Lexmark X945 - Setting the Printer up in a New Location; Shipping the Printer

Setting the printer up in a new location
To set up your printer configuration again:
1 Unpack all items.
2
Select a proper location for the printer. For a basic printer, or a printer with an optional finisher, allow the following
recommended amount of space around the printer:
1 50 mm (2 in.)
2 825 mm (2.7 ft)
3 418 mm (1.4 ft)
4 100 mm (4 in.)
5 1750 mm (5.8 ft)
3
Complete the setup of the printer and scanner by completing the “Setting up the printer” chapter in the Setup Guide.
4
Verify that the printer and scanner are functioning properly by printing a menu settings page.
Shipping the printer
If shipping the printer, the scanner, and any options, save the original packaging or call the place of purchase for a
relocation kit. Disassemble all the items before packing. For more information, see “Disassembling the printer from the
scanner shelf prior to the move” on page 22.
Maintaining the printer
25