Maintaining the printer
Periodically, certain tasks are required to maintain optimum print quality.
Storing supplies
Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you
are ready to use them.
Do not expose supplies to:
•
Direct sunlight
•
Temperatures above 35°C (95°F)
•
High humidity above 80%
• Salty air
•
Corrosive gases
•
Heavy dust
Checking the status of supplies
A message appears on the display when a replacement supply item is needed or when maintenance is required.
Checking the status of supplies from the control panel
1 Make sure the printer is on and Ready appears.
2 On the home screen, touch .
Note: If is not on the home screen, print a menu settings page to review the status of the supplies.
Printing a menu settings page
Print a menu settings page to review the current menu settings and to verify printer options are installed correctly.
1 Make sure the printer is on and Ready appears.
2
On the home screen, touch .
3
Touch Reports.
4 Touch Menu Settings Page.
Checking the status of supplies from a network computer
Note: The computer must be connected to the same network as the printer.
1
Open a Web browser.
2
In the address bar, type the IP address of the network printer (for example,192.264.263.17).
Maintaining the printer
3
To Next Page
Loading...
