Lexmark X954 - Page 61

61
5.3.1.2 Lexmark C950, Lexmark X950, Lexmark X952 and Lexmark X954 Optional Standard
Finisher
The optional finisher supports Corner staple, Dual staple (IPDS Edge stitch), and Double Dual staple
(IPDS Edge with four staples). The printer automatically rotates the text 180 degrees for short-edge fed
paper. If necessary, reformat your job on the host with a different text orientation to avoid stapled sets
that are hard to read.
Refer to your printer or finisher documentation to determine the finishing support and staple location for
various paper sizes. Finishing functions may not be applied to all paper sizes.
See Lexmark C950, Lexmark X950, Lexmark X952 and Lexmark X954 Optional Advanced Finisher
Functions (on page 58). For information of additional functions supported.
Below are example of job output statements that include the Form Definition to place staples in the
printed output.
Corner staple
//OUT1 OUTPUT CLASS=C,COPIES=1,FORMDEF=FC0010
Dual staple
//OUT1 OUTPUT CLASS=C,COPIES=1,FORMDEF=FE0010
Drawing of staple placement for simplex form definitions
Text
Text text text text
text
Text shown with 0
degree rotation
specified in IPDS job
FC0010
Long-edge fed paper,
leading edge
FE0010
Text Text text text text text text.
Text shown with 0
degree rotation
specified in IPDS job
FC0010
Short-edge fed paper,
leading edge
FE0010